|

Firstly,
make sure the length of your bridge is always constant. To
achieve this, mark your cue with ink, (Figure 1) at the point
where it rests over the bridge at the address position - when
the tip of the cue is not quite in contact with the cue ball.
The
distance from the mark to the top of the cue will be about
12 inches (30 cm).
In
Figure 2, the player is in the address position. Without a
cue ball, the player is addressing the brown spot along the
baulk line.
In
Figure 3, the player has finished the last back swing and
is ready to go through with the cue.
As
Figure 4 shows, the tip of the cue should now be some four
to five inches (10-12.5 cm) away from the cue ball, as the
mark on the cue shows clearly.
The
player, in Figure 5, shows the finish of the stroke. The cue
has maintained a horizontal position throughout.
Figure
6, illustrates the completion of the follow through. If the
back hand is five to six inches (12.5-15 cm) from the chest
when the waggles start, having finished the last back swing
and gone through with the shot a player can complete the shot
and get well through the cue ball before the back hand hits
his chest.
Now,
if we are going to use this method instead of the much advocated
pendulum method, how can we ensure that the cue will not lift
at the back? The key to keeping the cue horizontal lies in
the grip.
Different players, of course, have different grips. John Parrott
feels the shot with the first finger, Steve Davis with two,
and some players use a three-finger grip.
But to keep the cue horizontal, as demonstrated in "The
Grip", you must 'ease the back fingers, as the
cue goes forwards and backwards.
The
Frank Callan Suite - 8 Collinson Street - Ribbleton - Preston
- PR1 5EY
t.
+ 44 (01772) 702211 - f. 44 (01772) 793700
|